4 Pin Car Reverse / rear Camera replacement for our ZD72 4k Dashcam.
There are lots of variants of this camera online but not many have this specification.
This is 5 volts and only compatible with 5 volt rear camera systems, you can see which pin the 5 volts is on in the photo above. This is also compatible with some mirror dashcams as per voltage above.
The camera is waterproof and can be used either internally or externally.
The camera itself has a 46cm cable to a 4pin circular connection plug and a red wire that can be connected to the reversing signal of your vehicle to activate reversing mode on the dashcam (not required).
Also supplied is the 4 Pin to 2.5mm Male Plug lead, 5.5mtrs long that runs to the front camera along with sticky pad and 2 screws for mounting.
The camera design might vary slightly from the photos but the specification and functionality are the same.
 
Available as Rear camera only (with 50cm cable) or Rear Camera (with 50cm cable) and long 5 metre extension cable including red reversing wire.