Our very own unique protected design, rear dashcam camera mount, professionally manufactured in house in tough heat resistant ABS/ASA durable plastic (not to be confused with copies using cheaper materials with poor fitment that may warp and bend in heat).
We are Dashcams.co.uk and have installed thousands of Dash cams into vehicles, we know the exact applications and are meticulous in our designs, premium materials and products.
Our custom mount avoids the tough tailgate install, harder on Jaguar, Range Rover and Landrover vehicles along with Ford, Hyundai, VW, BMW, Porsche, MG EV, Kia, Volvo etc.
Some vehicles have difficult to remove parts that are easily broken on Volkswagen Audi Group ( VAG that also include Cupra, Porsche, SEAT, and Škoda) some also have bonded rear glass so there no neat route to run a cable and hide it.
Use our unique camera mount by simply slotting it onto your trim headliner and then securing your camera to the mount.
This bracket will allow a speedy and professional looking install even from a DIYer that wishes to install their own dashcams. EASY 3-STEP INSTALL (See Photos).
6 sizes to choose from, triple pack for the USA market for 3 x mounts in ANY size (Make sure to let us know your 3 x sizes by clicking VIEW CART and then in the Comments Box at checkout ). If you dont let us know, you will be sent 1 x DC01, 1 x DC02 and 1 x DC03).
Buy More - Save More, simply add the quantities to your basket for the offer to be automatically applied).
Make sure that your headliner trim is flexible. Check this by following the install photos on this page. If you can pull down the headliner trim slightly, the bracket will work great. All you need to do is measure the depth of your headliner trim.
Please check the measurements specific to your vehicle (we have started listing sizes and vehicles below based on customer feedback but please still check your own as there may still be variances in the different models and their respective years).
UK Vehicle compatibility ( Please use the measurement guide for all other vehicles)
Audi A1 mk1, A3 : DC03
Audi A4 Avant estate : Not compatible
Audi Q3 2024, Q4 (2024 Etron) : DC02
Audi Q5 2019 : DC03
Audi Q6 2025 Etron: DC01
Audi S3 2022 : DC03
BMW 1 series : DC03
BMW 3 series tourer, 4 series F36, X1 (2024), X5, X6 : DC03
BMW iX : DC05
BYD Dolphin, Seal U : DC03
Citreon C5 Aircross : DC01
Dacia Duster 2019 : DC03
Ford Edge : DC01
Ford Fiesta MK8 ST , Ka 2014, Kuga 2024, Mustang Mach E, Puma 2022 : DC03
Ford Focus : DC02
Haval Jolion Pro : DC02
Honda Civic estate 2014, Civic hatch 2026, Honda e : DC03
Honda HRV : Not compatible
Hyundai I10 N line (2021) : DC03 (trim 3mm at top of trim)
Hyundai Inster 2026, Kona 2025, Santa Fe 2018 / 2025, Tucson Hybrid (2024) : DC03
Jaguar E Pace, F Pace, iPace : DC02
Jaguar F-Type : DC03
Jaguar XF Sportbrake : DC02
Kia EV6 : DC03
Kia Optima, Sorrento, Sportage : DC03
Land Rover Defender L663 : DC04
Lexus LBX : DC03
Mazda 3 2016, CX5 2018 : DC03
Mercedes A Class, GLC 2025 : DC03
MG HS PHEV 2024, ZS EV : DC03
MG S5 EV 2025, IM6 2026 : DC02
Mini : DC03
Mini Clubman 2016 : DC04
Nissan Juke, Qashqai : DC03
Omoda E5 Noble : DC01
Peugeot 208 2025, e2008 GT, 3008 GT (73 plate) : DC02
Peugeot 408 2024 : DC03
Porsche Cayenne Coupe : DC03
Porsche Cayman 718, 987.2 : DC02
Range Rover, Evoque, Vogue L405 : DC01
Range Rover Sport (L461), Evoque (new model) : DC03
Range Rover Evoque : DC01
Range Rover Velar 2026 : DC02
Renault Captur, Clio E-Tech 2024, Clio mk4, Symbioz : DC02
Renault Clio, Scenic E-Tech, Zoe 2021 : DC03
Seat Leon Sports Tourer mk3.5, Leon 2019 : DC02
Seat Cupra 25, Cupra Ateca, Mii, Ibiza : DC03
Seat Tarraco : DC02
Skoda Citigo, Enyaq, Fabia, Kodiaq, Superb : DC03
Skoda Elroq, Kamiq, Karoq, Scala : DC02
Subaru Forester : DC02
Suzuki Vitara (2015 on) : DC03
Tesla Model S, Model Y, Juniper : DC03
Toyota Corolla 2025 :DC03
Toyota RAV4 Phev, Yaris Hybrid (mount to one side) : DC03
Vauxhall Corsa 2017, Crossland : DC03
Vauxhall Corsa 2020, Grandland 2025, Mokka : DC02
VW Arteon, Golf, Polo, T-Roc, Up : DC03
VW Tiguan MK2 2016,2017 : DC02
Volvo EX30 : DC01
Volvo V60 2025 : DC02
Volvo XC40, XC60 : DC03
Volvo XC90 : DC02
Not listed? Take a photo with a tape measure and email it across to Mount@Dashcams.co.uk
Whilst every effort is made to ensure 3d printed products are of high quality, there may be on rare occasion slight imperfections on the surface due to a change in materials. Rest assured, this has no affect on the integrity and strength of a functional part.
*** Please note, our postage costs to the USA cover Postal Delivery Duties Paid (PDDP) where possible. However, the customer bears the responsibility for any other clearance fees should they arise. ***
USA Rear Window Dash Cam Mount bracket - USA Shipping
Installing your mount is designed to be effortless. Please refer to our instructional photos and video in the gallery above:
-
Locate: Find the edge of your vehicle's rear headliner (the fabric trim at the top of the rear window).
-
Slide: Just like sliding a paper clip, slide the bracket onto the trim.
-
Stick: Stick your rear dashcam into place.
Done! You’re ready to record.
LEGAL NOTICE TO INFRINGERS
Our unique dashcam mounting brackets (DC01–DC05 including magnetic derivatives) are the exclusive Intellectual Property of Dashcams Ltd.
* REGISTERED DESIGN: These products are protected with the UK IPO. Any unauthorised manufacture, sale, or distribution of identical or substantially similar designs is a direct legal infringement.
- COPYRIGHT PROTECTION: All website text, technical fitment data, and proprietary vehicle-specific research are protected under UK Copyright Law. Verbatim copying of our descriptions or data is strictly prohibited.
We actively monitor global marketplaces, including eBay, Amazon, and Etsy. We do not issue warnings; we pursue all infringements immediately and formal legal action where necessary. Breaches of our Registered Designs and Copyright will be pursued legally to the full extent of the law.
-
