Does your Nextbase dashcam install look like this?
- David Johnson
- 2 days ago
- 4 min read
Or maybe this:
Use our bespoke magnetic headliner mount to transform your Nextbase dashcam installation:
Install in minutes!
No skill or tools required!
Transform nextbase dashcam installs to a clean factory look with no visible wires!
We have added many more vehicles to our compatibility list and yours could be next!
All you need to do is send us a photo of your trim with a tape measure next to it if its not in our compatability list.
Our popular rear dashcam mount is compatible with the Nextbase rear magnetic Dash cams. Our innovative solution simplifies the installation process for hatchback, saloon and estate vehicles, making it easier than ever to achieve a clean, professional look without the hassle of complex cable routing.
Simplifying Rear Dashcam Installation
Installing a rear dashcam in a hatchback, saloon or estate vehicle can be a time-consuming and challenging task. Traditionally, routing the rear camera cable involves navigating through the rubber grommet that connects the vehicle body to the tailgate. This often requires removing trim panels, specialised tools, and, in some cases, even the rear spoiler—particularly in vehicles like Volkswagen, Audi Group (VAG), Range Rover, Jaguar, and Land Rover. This process can take anywhere from 15 minutes to well over an hour and risks damaging delicate components like the grommet, which could lead to water ingress.
Our Magnetic Rear Dashcam Mount for Nextbase eliminates these challenges. Designed with ease and efficiency in mind, this mount allows you to install your Nextbase rear dashcam in minutes, bypassing the need for complex tailgate wiring.
Compatible with Nextbase models 322GW, 422GW, 522GW, and 622GW (nextbase magnetic ball camera PN NBDVRS2RWC ), this mount is perfect for DIY installers and professionals alike. We are the first to integrate a Nextbase compatible magnetic mount into our unique headliner trim mounts.
Key Features of the Magnetic Rear Dashcam Mount
Magnetic Design for Easy Installation: The mount securely attaches to your vehicle’s headliner trim, allowing you to slot it in place and route cables neatly along the trim for a polished, wire-free appearance.
Professionally 3D Printed: Designed and crafted in-house using durable, heat-resistant ABS/ASA plastic (similar to LEGO!), this mount is built to withstand high temperatures near vehicle glass on hot days.
Vehicle Compatibility: Available in four variants—Bare Magnetic Mount (with sticky pad) or integrated Magnetic mount on the DC01, DC02, and DC03—to suit a wide range of vehicles. The mount is ideal for most hatchbacks, saloons and estates but not designed for near-vertical rear glass (contact us if unsure).
No Special Tools Required: Unlike traditional installations that may require removing tailgate trim, grommets, or spoilers, our mount simplifies the process, saving time and reducing the risk of damage.
Custom Fit for Nextbase: Specifically engineered for Nextbase rear cameras, ensuring a secure and reliable fit.
Why Choose Our Magnetic Mount?
For vehicles like Jaguar, Land Rover, Range Rover, Volkswagen, Audi, Ford, Hyundai, BMW, Porsche, and more, routing cables through the tailgate can be daunting. Some vehicles have bonded rear glass or delicate grommets that are prone to breaking if not handled correctly. Our magnetic mount offers a hassle-free alternative by attaching directly to the headliner trim, allowing you to route cables along the trim without dismantling critical components.
To ensure compatibility, simply measure the depth of your vehicle’s headliner trim (as per the photo) and compare it to the mount sizes provided. If your vehicle’s headliner trim is flexible and can be slightly pulled down, the mount will work perfectly.
For specific vehicle compatibility, check the list below based on customer feedback or the product page for updated models (always verify measurements for your model and year):
Audi: A1, A3 (DC03), Q3/Q4 2024 (DC02), Q5 2019 (DC03), Q6 2025 Etron (DC01). Note: Audi A4 Avant not compatible.
BMW: 1 Series, 3 Series Tourer, 4 Series F36, X1/X5/X6 2024 (DC03), iX (DC05).
BYD: Dolphin, Seal U (DC03)
Ford: Edge (DC01), Fiesta MK8 ST (DC03), Focus (DC02), Mustang Mach E (DC03).
Haval Jolion Pro: (DC02)
Hyundai: I10 N Line 2021 (DC03, trim 3mm at top), Kona 2025, Tucson Hybrid 2024 (DC03).
Jaguar: F-Pace, iPace, XF Sportbrake (DC02), F-Type (DC03). E-Pace: contact us.
Kia: EV6, Optima, Sorrento, Sportage (DC03).
Land Rover: Defender L663 (DC04).
Lexus LBX: (DC03)
Mazda: CX5 (68 plate) (DC03)
Mercedes: A Class, GLC 2025 (DC03)
MG: HS PHEV 2024 (DC03), S5 EV 2025 (DC02), ZS EV (DC03)
MINI: (DC03)
Nissan: Juke, Qashqai (DC03)
Omoda: E5 Noble (DC01)
Peugeot: e2008 GT, 3008 GT (73 plate) (DC02)
Porsche: Cayenne Coupe (DC03), Cayman 718 (DC02)
Range Rover: (DC01) Evoque (DC01), Evoque new model, Sport L461 (DC03). Velar: contact us.
Renault: Captur, Clio E-Tech 2024, Symbioz (DC02), Scenic E-Tech, Zoe 2021 (DC03)
Seat: Leon Sports Tourer mk3.5, Tarraco (DC02), Mii, Ibiza (DC03)
Skoda: Citigo, Enyaq, Kodiaq (DC03), Elroq (DC02)
Subaru: Forester (DC02)
Suzuki: Vitara (2015 on) (DC03)
Tesla Model S: (DC03)
Toyota: Corolla 2025, Toyota RAV4 Phev, Yaris Hybrid (mount to one side) (DC03)
Vauxhall: Corsa 2017, Crossland (DC03), Corsa 2020 (DC02)
VW: Golf, Polo, UP (DC03), Tiguan MK2 2016 (DC02)
Volvo: EX30 (DC01), V60 2025, XC40, XC60, XC90 (DC02).
Not listed on our Nextbase magnetic rear mount product page? Email a photo with a tape measure to NextbaseMount@Dashcams.co.uk.
Save Time and Money
Our magnetic mount reduces installation time from hours to just minutes.
Customer Feedback
We’ve received fantastic reviews from owners of VW, BMW, Jaguar, Land Rover, Range Rover, Audi, Porsche, Ford, Skoda, and more. Our mounts are praised for their ease of use, durability, and professional finish.
Get Yours Today!
Priced from £14.99 with various options available for many vehicles, the Magnetic Rear Dashcam Mount for Nextbase is available now. Visit our product page to order and simplify your dashcam installation.
Have questions or need help confirming compatibility? Email us at NextbaseMount@Dashcams.co.uk with a photo of your headliner trim and measurements.
Our dashcam mounts are compatible with just about any Dashcam, be it FineVu, Viofo, Gnet, Blackvue, Goluk, Nextbase, Mio, Thinkware, Vantrue, Orskey, RedTiger, Wolfbox and many more!
SHARE THIS POST, TAG A FRIEND and LIKE OUR FACEBOOK and INST PAGES for upcoming news including giveaways!
#reardashcammount #dashcam #dashcambracket #ABSdashcam #FineVu #Viofo #Gnet #Blackvue #Goluk #Mio #Thinkware #Vantrue #Orskey #RedTiger #Wolfbox #Nextbase #NextbaseMagneticMount
